top of page

  C2400  Concentrate

Impregnating additive for cement based substrates.

For professional and cost effective concrete and masonry protection.

 

Product Description

C2400 Concentrate is a solvent-free, self-assembling micro emulsion. Manufactured with a new patented process, with very consistent and small particle size. The small molecular chain creates a capillary impregnation without filling the pores and capillary structure. The product is designed as a water-soluble impregnating agent for masonry, including highly alkaline surfaces. It chemically bonds with concrete and masonry substrates and becomes invisible once dry. Its penetration and subsequent chemical reaction with the concrete allow it to provide long term protection for cement based substrates by significantly reducing the ingress of liquid water and any dissolved salts and contaminations that the water may carry.

Moss and Algae reduction. Fast drying surface, less microbial growth and less slippery surfaces.

 

Benefits

  • Water based, environmentally friendly, improves OH&S

  • Solvent free and low VOC

  • Outstanding wear and durability, for high traffic areas, driveways, roads, runways

  • One litre concentrate = 10 litres ready to use product

  • Dilute with ordinary tap water, 1 litre to 9 litres tap water

  • Coverage 50m² / 540 sq ft. per litre

  • LEED conformity, VOC free,

  • Plant-friendly and does not damage glass

  • Can be used as an additive

  • Stops efflorescence

  • 90% reduced packaging waste and transport costs.

  • Packing: 1 Litre, 20 Litre, 200 Litre, 1000 Litre Tank

​

Durability

Lasts up to 10 years on horizontal surfaces and up to 15 years on vertical surfaces.

​

Application Directions

The surface must be clean, dry and free of dirt, dust, contaminants, oil and coatings. Old and moss algae invested substrate should be cleaned with high pressure water. Efflorescence must be removed. The substrate must be dry before the application. A typical formulation for diluting C2400 Concentrate with water is as follows: For surface application mix 1 part C2400 with 9 parts of tap water. For the use of C2400 as additive please refer the technical data sheet or contact or technical department.

On new concrete or masonry special surface preparation is not normally required. Test on a small area first.

 

Precautions and Storage

C2400 Concentrate can be stored in tightly sealed original containers for 24 months, if at moderate temperatures. It is important to reseal containers tightly after use. Store in a cool, dry place and protect from heat, freezing and direct sunlight. Avoid contact with eyes. In case of eye contact with the product, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs. Please refer the MSDS and the Technical Data Sheet available from nanobond. First aid: Eye contact: Rinse with plenty of water. Skin contact: Wash off with soap and water. First aid for swallowing: give copious amount of water to drink.

 

bottom of page