Infomation Brochure M64
Nanobond ltd M64 Metal 

Brown discoloration or Tea staining of stainless steel in a coastal environment is a common problem in New Zealand and overseas.
M64 Metal is a product for the removal of stubborn tea stains, oxidations and contaminations from uncoated metal surfaces like stainless steel, aluminum and other uncoated metals.
A special formulated mirco abrasive blend makes it easy to remove all stains and the hydrohobic active substance provide a long lasting , ultra thin protection and a durable easy to clean surface effect.

The application is a simple polishing process were the contamination is removed and the protection is applied with the same application step.
Stainless steel and other metals will stay shiny and protected even at harsh marine environments or in areas with high pollution or dust levels.
Older and contaminated surfaces can be brought back to the original conditions.
Water runs off easily from the treated surface.

The protective effect last up to 2 years, and show increasing life span with periodical application.
During this time all contaminations can be wiped off with a wet cloth.
The product can be applied directly to the substrate to be cleaned or to be protected, without
further preparation. Low consumption between 20 and 50 ml a square metre depending on the
conditions of the substrates.
20- 60 square meter per litre( 180 – 540 square foot)
M64 Metal treatment features & benefits:-
 For any metal surface
 Low consumption
 Easy to apply
 Excellent stain removal
 Simple to maintain, easy re-application
 Economical use
 Excellent long term protection
 Reduces dirt adherence, easy to clean effect
 Significant reduces the maintenance time and costs.


APPLICATION DIRECTIONS
Surface preparation
Apply evenly with micro fiber cloth and polish
until metal is clean and shiny.
Remove dry product residue during or directly after the application with soft cloth.

 

 

 

The information, and, in particular, the recommendations relating to the application and end-use of the products, are given in good faith based on current knowledge and experience of the products when properly stored, handled and applied under normal conditions. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered.
The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.